GEPRC STABLE F411 BetaFlight OSD Flight Controller 12A Blheli_S 2-4S Brushless ESC 25/100/200mW VTX Stack 16mm*16mm

Overview
The GEPRC STABLE F411 micro tower electronic system is one of the best electronic system solution for micro quads on the market.
STABLE F411 is equipped with F411 FC, 4IN1 BLS 12A ESC and 5.8G PIT/25/100/200mW, @It supports 2-4S batteries,@which could meet all kinds of demand environment. With the three-layer structure design and completely optimized pad structure, wiring is simpler and more reasonable.
STABLE F411 adopts 16*16 mm mounting holes and pin-type modular design. Supporting IRC TRAMP protocol, you can directly adjust VTX frequency, frequency and flight control parameters in the OSD interface, which is very convenient and easy to use. With LED interface, you can program your LED strip with Betaflight Ground Station. You can clearly see aircraft’s voltage, current, battery usage and other information with integrated OSD chip.
STABLE F411 is equipped with a 200 mW VTX, which can easily cope with various flight environments. While the build-in PIT mode (low power mode) is very convenient for competition use, and your VTX will not affect others when adjusting the frequency. A professional 5.8G rod antenna is equipped to achieve ideal transmission effect.
STABLE F411 supports a variety of receivers including Sbus, PPM, CRSF, DSMX, iBus protocols, which can be used with your remote control.
Main Feature
MCU:STM32F411
IMU:MPU6000 gyro/accelerometer (SPI)
Continuous current:12A
Input voltage:2-4S LIPO
Power:PIT/25/100/200mW
Integrated LC Filter
Mounting holes:16mm*16mm
Support:Sbus,PPM,CRSF,DSMX,iBus
STABLE F411 Flight Controller(16*16mm)
MCU:STM32F411
IMU:MPU6000 gyro/accelerometer (SPI)
OSD:BetaFlight OSD w/ AT7456E chip
BEC Output:5V@2A
Size:21mm*21mm
Mounting holes:16mm*16mm
Integrated LC Filter
Input voltage 2-4S LIPO
Firmware target:MATEKF411
Weight:2.5g
STABLE F411 BLheli_S 4IN1 12A ESC(16*16mm)
MCU:BB21F16G
Continuous current:12A
Input voltage:2-4S LIPO
ESC protocol:pwm, oneshot125, multishot, dshot150, 300, 600, etc.
Size:23mm*21mm
Mounting hole:16*16mm
Firmware target:Blheli_S G_H_30
Current meter:210
Weight:2.7g
STABLE F411 VTX 5.8G 200mW(16*16mm)
Power:PIT/25/100/200mW
Antenna interface:IPEX (UFL)
Telemetry:IRC Tramp
Size:17mm*27mm
Mounting holes:16*16mm
Integrated LC Filter
Weight:1.6g
User Manual, DOWNLOAD

Package Included
1 x STABLE F411 Flight controller
1 x STABLE F411 BLheli_S 4IN1 12A ESC
1 x STABLE F411 VTX 5.8G 200mW
1 x 5.8G Antenna
1 x XT30 Cable