XBOSS AC900 V2 0.9g RC Mini Dual-core Receiver Support S-FHSS FRSKY D16 (NO Telemetry) for RC Racing Drone

XBOSS AC900 V2 0.9g RC Mini Dual-core Receiver Support S-FHSS FRSKY D16 (NO Telemetry)@for RC Racing Drone

Description
Item name:AC900 Mini Receiver
Rate voltage:4.0~6.0V
Size 10 x 16.5 mm
Weight:only 0.9g
Perfect fit small racing drone
Include high-performance discrete LNA chip
Receiver working@distance@200M
S-FHSS mode support 14SG/16SZ/18SZ/18MZ etc.
D16 mode support Frsky X9D/X12S etc.
STATUS LED:LED of AC900 blink twice then solid when power on, the meaning as follow.
First blink@(receive mode):Second blink@(failsafe mode):Then solid@(signal status)
S-FHSS:Failsafe mode 1:No signal
FRSKY D16:Failsafe mode 2:Signal received
BIND:check receive mode before bind, the first blink after power on indicate the setting,Red is@S-FHSS,Green is@D16.
S-FHSS BIND:FRSKY D16 (NO Telemetry)@BIND
Turn on the TX then power on AC900 while pressing
the key, green LED fast blink meaning already in bind
mode, user can release the key. Bind procedure is
completed and the receiver is working normally when
green LED is solid.
Power on AC900 while pressing the key, green LED fast
blink meaning already in bind mode, user can release
the key, then set your TX into D16 bind mode. red LED
solid meaning bind finished, exit TX from bind mode,
receiver’s green LED solid meaning working normally.
FAILSAFE:second blink after power on indicate failsafe setting, please make sure failsafe is working correctly !
FAILSAFE MODE 1:FAILSAFE MODE 2
After 1 second when lost transmitter signal, S.BUS
keep output, Throttle will 988us, all other channels will
1500us.
After 1 second when lost transmitter signal, S.BUS not
output, user should setting related parameters to
ensure flight controller handle failsafe.
FAILSAFE MODE AND RECEIVE MODE SWITCH
FAILSAFE MODE SWITCH:RECEIVE MODE SWITCH
Press the key and hold when AC900 working normally ,
the LED will go off, after 3 seconds yellow LED will blink
once, release the key receiver will switch to another
failsafe mode then restart automatic, LED will blink
twice then solid, for definitions of LED please reference
STATUS LED section above.
Press the key and hold when AC900 working normally,
the LED will go off, after 3 seconds yellow LED will blink
once, keep hold until yellow LED solid, release the key
receiver will switch to another receive mode then restart
automatic, LED will blink twice then solid, for definitions
of LED please reference@STATUS LED section above.

Package Included
1 x AC900 RC Receiver